FACTORS AFFECTING SALINITY REDUCTION IN LAKE TARPON,PINELLAS COUNTY,FLORIDA1

ABSTRACT: Following an enclosure of a sink-hole connecting Lake Tarpon to the Gulf of Mexico, the chloride concentration of lake waters decreased. Water and chloride budgets for the lake in 1975 were prepared, and predictions using the model of Lerman and Brunskill (1971) were made as to the time required for the lake to achieve fresh water status. Model verification indicated good agreement with predictions in 1976; however, data on [C1^-] for 1977 and 1978 are not as supportive of the model used. The information concerning the Lake Tarpon watershed provided by this latter fact is discussed.     

AN EXAMINATION OF LAND USE - NUTRIENT EXPORT RELATIONSHIPS1

ABSTRACT: Lake and watershed management strategies and recent environmental legislation dictate that nonpoht nutrient sources associated with storm water runoff must be assessed. Accordingly, a nutrient flu assessment for phosphorus and nitrogen is conducted through an extensive literature review of nutrient export studies. These studies are reevaluated. The nutrient export coefficients are screened according to sampling design criteria and compiled according to land use. The ecological mechanisms within each land use influencing the magnitude of nutrient flux are also discussed     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

Mixing Processes in Geophysical and Astrophysical Flows – A Conference Report

The Third ERCOFTAC conference on `Mixing in Geophysical and Astrophysical Flows' was held at the University of Sheffield over the period 12–14 April 2000. The meeting attracted over forty participants from ten different countries. Some delegates had travelled from as far as U.S.A., Venezuela, Australia, Russia and Sweden to attend the conference. Nine invited papers were presented along with twenty-seven contributed oral presentations and six posters. The main topics discussed included stratified and rotating flows, gravity waves, turbulence and mixing. The presentations are summarised in this report, which aims to provide a broad account of current topics of interest related to mixing processes in geophysical and astrophysical flows.     

纳滤膜深度处理棉针织品印染废水

采用芳香聚酰胺膜(NF-1#)、复合膜(NF-2#)和聚酰胺复合膜(NF-3#)深度处理棉针织品印染废水，考察了膜分离性能及膜污染情况的影响因素。实验结果表明，在操作压力为0.5MPa、废水温度为25~35℃、废水pH为7的条件下，NF-1#膜处理效果最佳，COD去除率最高，为76.0%~85.0%;脱盐率也最高，达90.0%。膜过滤后浓水送污水厂处理，产水回用于车间生产。操作压力增高、废水温度升高和废水pH增大均导致滤饼层阻力(Rc)和膜过滤过程中的总阻力(Rt)增加，Rc是Rt的主要组成部分，同时也是导致膜透过通量下降的主要因素。     

Visible leaf injury in young trees of Fagus sylvatica L. and Quercus robur L. in relation to ozone uptake and ozone exposure. An Open-Top Chambers experiment in South Alpine environmental conditions

An Open-Top Chambers experiment on Fagus sylvatica and Quercus robur seedlings was conducted in order to compare the performance of an exposure-based (AOT40) and a flux-based approaches in predicting the appearance of ozone visible injuries on leaves. Three different ozone treatments (charcoal-filtered; non-filtered; and open plots) and two soil moisture treatments (watered and non-watered plots) were performed. A Jarvisian stomatal conductance model was drawn up and parameterised for both species and typical South Alpine environmental conditions, thus allowing the calculation of ozone stomatal fluxes for every treatment. A critical ozone flux level for the onset of leaf visible injury in beech was clearly identified between 32.6 and 33.6 mmolO3 m(-2). In contrast, it was not possible to identify an exposure critical level using the AOT40 index. Water stress delayed the onset of the leaf visible injuries, but the flux-based approach was able to take it into account accurately.     

A new tracer technique for monitoring groundwater fluxes: the Finite Volume Point Dilution Method

Quantification of pollutant mass fluxes is essential for assessing the impact of contaminated sites on their surrounding environment, particularly on adjacent surface water bodies. In this context, it is essential to quantify but also to be able to monitor the variations with time of Darcy fluxes in relation with changes in hydrogeological conditions and groundwater - surface water interactions. A new tracer technique is proposed that generalizes the single-well point dilution method to the case of finite volumes of tracer fluid and water flush. It is called the Finite Volume Point Dilution Method (FVPDM). It is based on an analytical solution derived from a mathematical model proposed recently to accurately model tracer injection into a well. Using a non-dimensional formulation of the analytical solution, a sensitivity analysis is performed on the concentration evolution in the injection well, according to tracer injection conditions and well-aquifer interactions. Based on this analysis, optimised field techniques and interpretation methods are proposed. The new tracer technique is easier to implement in the field than the classical point dilution method while it further allows monitoring temporal changes of the magnitude of estimated Darcy fluxes, which is not the case for the former technique. The new technique was applied to two experimental sites with contrasting objectives, geological and hydrogeological conditions, and field equipment facilities. In both cases, field tracer concentrations monitored in the injection wells were used to fit the calculated modelled concentrations by adjusting the apparent Darcy flux crossing the well screens. Modelling results are very satisfactory and indicate that the methodology is efficient and accurate, with a wide range of potential applications in different environments and experimental conditions, including the monitoring with time of changes in Darcy fluxes.     

Implementation of a windblown dust parameterization into MODELS-3/CMAQ: Application to episodic PM events in the US/Mexico border

Windblown dust is known to impede visibility, deteriorate air quality and modify the radiation budget. Arid and semiarid areas with unpaved and unvegetated land cover are particularly prone to windblown dust, which is often attributed to high particulate matter (PM) pollution in such areas. Yet, windblown dust is poorly represented in existing regulatory air quality models. In a study by the authors on modeling episodic high PM events along the US/Mexico border using the state-of-the-art CMAQ/MM5/SMOKE air quality modeling system [Choi, Y.-J., Hyde, P., Fernando, H.J.S., 2006. Modeling of episodic particulate matter events using a 3D air quality model with fine grid: applications to a pair of cities in the US/Mexico border. Atmospheric Environment 40, 5181–5201], some of the observed PM₁₀ NAAQS exceedances were inferred as due to windblown dust, but the modeling system was incapable of dealing with time-dependent episodic dust entrainment during high wind periods. In this paper, a time-dependent entrainment parameterization for windblown dust is implemented in the CMAQ/MM5/SMOKE modeling system with the hope of improving PM predictions. An approach for realizing windblown dust emission flux for each grid cell over the study domain on an hourly basis, which accounts for the influence of factors such as soil moisture content, atmospheric stability and wind speed, is presented in detail. Comparison of model predictions with observational data taken at a pair of US/Mexico border towns shows a clear improvement of model performance upon implementation of the dust emission flux parameterization.     

MBR中水力条件对五孔中空纤维膜污染的研究

为了对五孔中空纤维膜在分置式膜生物反应器(MBR)处理模拟印染废水中膜污染特性进行研究,提出从水力学角度考察膜污染特性。在曝气强度分别为25,50,75,100 L/h,出水通量分别为9,12,15,18 L/(m2·h)的工况下考察膜污染表征系数跨膜压差(TMP)的变化情况。得出如下结论:出水通量稳定时,在一定范围内曝气强度的增加可使TMP的增长率降低,即延长膜稳定运行时间,有效缓解膜污染;在次临界通量下曝气量恒定时,出水通量越小,TMP的增长率越小,即膜的稳定运行时间越长。此实验结果对MBR中膜污染的有效控制和水力条件优化提供数据依据。     

Ozone concentrations, flux and potential effect on yield during wheat growth in the Northwest-Shandong Plain of China

Ozone (O₃) concentration and flux (F_o) were measured using the eddy covariance technique over a wheat field in the Northwest-Shandong Plain of China. The O₃-induced wheat yield loss was estimated by utilizing O₃ exposure-response models. The results showed that: (1) During the growing season (7 March to 7 June, 2012), the minimum (16.1 ppbV) and maximum (53.3 ppbV) mean O₃ concentrations occurred at approximately 6:30 and 16:00, respectively. The mean and maximum of all measured O₃ concentrations were 31.3 and 128.4 ppbV, respectively. The variation of O₃ concentration was mainly affected by solar radiation and temperature. (2) The mean diurnal variation of deposition velocity (V_d) can be divided into four phases, and the maximum occurred at noon (12:00). Averaged V_d during daytime (6:00–18:00) and nighttime (18:00–6:00) were 0.42 and 0.14 cm/sec, respectively. The maximum of measured V_d was about 1.5 cm/sec. The magnitude of V_d was influenced by the wheat growing stage, and its variation was significantly correlated with both global radiation and friction velocity. (3) The maximum mean F_o appeared at 14:00, and the maximum measured F_o was − 33.5 nmol/(m²·sec). Averaged F_o during daytime and nighttime were − 6.9 and − 1.5 nmol/(m²·sec), respectively. (4) Using O₃ exposure-response functions obtained from the USA, Europe, and China, the O₃-induced wheat yield reduction in the district was estimated as 12.9% on average (5.5%–23.3%). Large uncertainties were related to the statistical methods and environmental conditions involved in deriving the exposure-response functions.